DIY Clay Nursery Mobile or Wall Hanging

I have two friends with new babies and a sister who is expecting, so instead of scour the interwebs and stores for gifts that may or may not be exactly what I would want to give (and would probably cost more than I want to spend), I decided that I'd make their gifts myself. I've actually had this project idea up on my DIY idea wall for half a year, so I was thrilled to actually find the time to try it out. It ended up being so fun and easy to make that it seems only fair that I share a tutorial with you all so you have a sweet DIY gift in your arsenal next time you have a special baby to spoil.

Psst...You can make at least three different mobiles with just the one package of clay. Personalized handmade gifts for less than $3 a piece = Awesome! 

 

• Printed template (download above)
• Scissors
• Rolling pin
• Craft knife
• Gel or felt-tipped pen (a finer tipped pen will work better than one with a large tip)
• Waxed paper for freezer paper (for protecting your work surface)
• Premier Stone Clay - available at craft stores such as Michael's or online
• Air-tight container or sealable plastic bag (for clay storage)
• Small glass of water (optional)
• Scrap paper

For finishing you will also need: 

• Twine or embroidery floss
• Wooden skewer
• Low heat hot glue gun OR Elmer's Paper Craft Gel Glue

Cut out your paper templates along the outside of the grey border.

Cover a smooth hard working area with a piece of wax or freezer paper (freezer paper, waxed side up works the best). Use your rolling pin to flatten your clay into an area that will fit at least one of your template shapes. The finished piece should be rolled to about 1/4 inch thick.

Place a template onto the prepped clay and use the tip of your craft knife to carefully trace around the outside of the design. You don't need to worry about cutting all the way through the clay the first time around. Once you've traced the design, use your craft knife to cut off the excess clay. Be sure to store all extra clay inside an airtight container while working so that it doesn't dry out.

Helpful bear-cutting tip: I found that it is easiest to cut the bear out by making as many straight cuts as possible. You can then round off the proper edges once you've removed the template.

Your cut out pieces might look a little bit jagged. No need to worry! Smooth out the edges by dipping your fingertip into water and gently rubbing along all the outside edges (you can smooth the surface as well if you'd like).

Once you've cut and smoothed out all your pieces, arrange them on top of your waxed paper in the order that you would like to hang them in. You can use the same layout that I used, or create your own arrangement.

Use a wooden skewer to pierce a hole into each piece where you will need to attach your twine for hanging. This hole will give you a place to glue your twine into later on, so be sure that you don't skip this step.

The hole-piercing configuration I used was: Bear: 2 holes - One at the top center, and one at the bottom center | Cloud: 4 holes - One at the top center, three spaced along the bottom edge | Raindrops: 1 hole - At the top of each droplet.

Now the hardest part...waiting for the pieces to dry. Start by allowing the clay to dry on a flat surface (I suggest using your waxed paper) and then after an hour or so, prop the pieces up against something to allow air to circulate around them. For best results, allow everything to dry for at least 12-24 hours or until completely dry to the touch.

Woohoo! They're dry! Now you get to add character to your mobile! Use a pen to create a design inside your clay pieces. For this project I wanted to keep it super simple, but you can be as creative as you'd like.

You can even fill in your shapes with colored pencils (or acrylic paint) if you'd like!

I decided to just use pen on mine. Make sure to create a design on both sides if you want the finished project to be used as a hanging mobile (that way there is always something sweet showing).

You can also include a child's name or a sweet greeting (i.e. "Welcome") on the cloud.

Tip: If your pen is drying out while you are working, you can fix the problem by scribbling a bit on a piece of scrap paper.

Arrange your pieces again how you'd like them to be while hanging. Now it's time to prep the twine. First create a loop for hanging the mobile. Make sure your knot is not too bulky.

You can determine the length of twine needed for each section by measuring it up against the arranged mobile. Now create the twine pieces for each hanging section by knotting both ends of each twine portion. 

Place the completed twine portions down into the right spaces as you work.

Plug your glue gun in or get out your Elmer's Paper Craft Gel Glue (this particular glue adheres to the clay very well and dries fairly quickly). Place a small dab of glue on one of the holes in your piece. Use your wooden skewer to push one knotted end of your twine into the hole with the glue. Repeat this process until you've attached your entire mobile together. It is best to leave the mobile laying down on your working surface while you are working so that the glue sets properly.

Bonus idea: It also occurred to me that you could make some pretty adorable Holiday ornaments by just making the bear portion of this DIY!

Once the glue has dried completely your mobile is ready to be hung up or given as a gift!

A special note: Please be sure that mobiles are hung out of reach of babies and small children. This project is meant to be an art piece, not a toy...and therefore is not strong enough to withstand a little ones' attention.

Tip: I recommend making several mobiles all at once, then you can tuck the extra ones away until you're in need of another baby gift. Just fill in the details with a pen when the time is right!

Easy DIY Fabric Baby Shower / Party Garland

As I mentioned yesterday, I created a simple little garland to decorate for my sister's baby shower on Sunday, and am excited to share the how-to with you here today. The process is so easy and perfectly customizable to any theme / color palette...maybe you'll create one for your next party or shower! Bonus, the garland is reusable for future parties, or can be used by the new mom to decorate her baby's nursery!

I came up with the concept after being inspired by this fabric ribbon garland by My Life as a Sugar Lander. I knew that I needed something that could be strung around the room...that wouldn't drape down nearly as much but would have a similar visual effect. My sister is really into sewing and since the gender of her baby is unknown I went for a color theme using her favorite shades of peach and blue. Here's what you'll need to create your own garland:

• Sturdy cotton twine
• cotton fabric strips (ribbon would also work - and would create a similar look)
• Fabric scissors
• Pushpins or tape (for hanging the garland)

Begin by ripping your fabric into even strips. Mine were about 1.5" wide. To create even strips quickly and easily, use a pair of scissors to snip along the top edge of your fabric, starting 1.5" in from the outside edge of your fabric. Grasp fabric with both hands on either side of the portion you just snipped and pull firmly apart...fabric will tear neatly. Repeat this process with as many strips as you'd like to use. Next you will cut your long strips into shorter pieces. I made mine 10" long, and they were the perfect length for tying.

Begin tying your fabric strips onto your twine one at a time. Lay a fabric strip down and place your twine on top of it. Tie a knot in your fabric around the twine. You can attach them featuring the colors and patterns in any order you'd like. Have fun with it.

Pull the knot nice and tight. Now it looks like a sweet bow!

Trim off the ends to make them perfectly even or shorter if you'd like (optional).

Ta-da! Repeat this step for as many bows as you'd like your garland to have. Since the bows are simply knotted on the twine they can be slid back and forth to create whatever kind of spacing you need. Hang your garland using pushpins or sturdy tape. Tip: To store your garland wrap it around a scrap piece of cardboard (like the inside tube of a roll of wrapping paper or the cut off flap on a cardboard box).

I also made another version in a different color combination using fabric scraps that my mom has had around since my childhood.

I hope you have a blast making your own version of this simple garland! xo Ez

Pinterest Picks: 07. 16. 12

Every Summer since moving to Oklahoma two years ago I've found myself mid-July gazing longingly at anything and everything that reminds me that cooler months will be coming around again. Something about these pretties on Pinterest bring late summer / early Autumn to mind and for this over-heated, humidity-drenched lady...that's a good good thing! If you're interested you can find and follow my pins over on Pinterest right here, and/or check out past Pinterest Picks collections on Creature Comforts here. xo Ez

1. DIY Mid-Century Modern House Numbers - Curbly (via Lia) | 2. Biscoff and Kahlua Crunch Cupcakes - Baker's Royale (via Paula) | 3. Frozen Coffee - Pepper.Ph (via Joanna) | 4. Casual Style - Sincerly Jules (via Ana) 

Popsicle Party Printables + DIY

Hi friends! Last year I painted some watercolor popsicles with grand DIY plans in mind for them. Unfortunately the Summer just breezed by and in the end I only managed to arrange them into a couple free Desktop Wallpapers (which you are still welcome to download and enjoy of course). Fortunately popsicles never go out of style and now I've finally gotten around to using them as I intended to all those months ago! Are you ready for a popsicle party (now yesterday's popsicle recipe roundup will come in handy)! Woohoo!

--------------------------------------------------------------------------------------------------------------------

This DIY post was sponsored and made possible by Method..."Clean Happy."

Are you a sweet clementine or are you feisty like sea salt + lime? Take a dishy personality test on Method’s Facebook page to find out your signature fragrance, and enter a sweepstakes to win a year’s supply of Method dish soap at the same time. Residents in the US and Canada (excluding Quebec, désolé!) are eligible to enter once through the Sweepstakes app on Method’s Facebook page. Contest is open until August 6th.

--------------------------------------------------------------------------------------------------------------------

Popsicle Mini Tote Favor Bags:

Supplies needed:

• Iron-on transfer paper | Available at office and craft supply stores
• Iron
• Mini cotton tote bags | I purchased these at Michael's Craft Store (they're about $1 a piece)
• Sharp scissors
• Favors (optional) | the items in my bags here are from Michael's and Party City

Get started by printing out your popsicle iron-ons (click on the download button below). If you'll be using a dark colored material behind the design, be sure to purchase transfer paper that is specially designed for dark fabrics.

Cut out your popsicle shapes as close to the colored design as you are able.

Position your iron-on face down on your fabric unless your transfer paper manufacturer directions state otherwise. Iron according to directions — for mine I used the highest cotton setting (no steam) and ironed with pressure on a hard surface (protected with a cotton cloth) for a couple minutes. Make sure your design fully adheres to the fabric on all edges.

Once the design has cooled to the touch, carefully peel away the paper backing.

Fill your bags with treats and other favors!

Now it's time to wrap up the gifts and decorate...

Printable Popsicle Gift Tags:

Popsicle Tag Supplies:

• Popsicle tag printable file (download found above)
• Cardstock
• Wooden popsicle sticks | Available at craft supply stores
• Glue stick | I prefer Uhu® Stic
• Scrap paper
• Scissors
• Small hole punch | Found at craft supply stores
• Twine or ribbon

A simple trick to make cutting your popsicle shapes easier is to begin by cutting along one straight edge as well as the top of each paper popsicle. You'll see that the popsicle designs are mirror opposites, so that when two of the same color from the printable are placed back to back, they line up properly with a pretty popsicle design on each side.

Once you have prepped two popsicles of the same color, place them back-to-back, lining up the cut edges.

Hold them firmly together so they don't slip and finish cutting out the final sides of the popsicle design - cutting through both pieces of paper until the full popsicle has been cut out.

Place your two matching popsicle pieces colored-side down on a piece of scrap paper and use a glue stick to apply a liberal amount of glue. Pay careful attention to the edges.

Apply a small amount of glue to the top half of a popsicle stick and place it into the center of one of your popsicles leaving about half of the stick laying outside the bottom of the design.

Place the two glued pieces on top of one another and seal together with the stick inside. Make sure to carefully seal around all outside edges as well as the center.

Trim any portions that don't line up properly.

Use a small hole punch to create a hole at the top edge or center of your popsicle tag.

Attach your tag to your gift by threading it onto twine or ribbon. Address to the lucky gift recipient using a pen (optional).

Printable Popsicle Party Garland:

Follow steps above for the Popsicle Gift Tags (using the same supplies as well). Create as many popsicles as you'd like to hang on your garland. Once all your popsicles are ready you can simply string them onto twine one at a time, tying them in place with a simple knot as you go. Once your garland is the length you'd like, hang it up and get ready to party!

Other ways you can use your printables or iron-ons:

• Use the popsicle tags as invites for your party. Hand-write a short invite message on your printed sheet of tags (or get handy with the text tool in photoshop if you feel so inclined), then glue the popsicle stick in place. Place in an envelope and mail!
• Use your iron-on transfers to dress up t-shirts or other cotton material (such as a pillowcase or tea towel). Just be sure to use transfer paper designed for the color you'll be ironing onto (they make transfers for light and dark materials).
• Popsicle tags can serve as placecards. Just write your guests names on each popsicle and arrange them around your table.
• Tags can also serve as a fun cake topper. Try arranging several on the top of a cake (you can write a message on them first if you'd like) or place one in the center of a cupcake. Cute!

--------------------------------------------------------------------------------------------------------------------

Full disclosure: This DIY post was sponsored and made possible by Method. The project and any opinions expressed are my own.

5 Minute DIY: Gilded or Vibrantly Painted Mini Clothespins

It seems that often times the simplest things are the last things you think of. Such is the case with these DIY Painted Mini Clothespins. I've had an inspiration wire (literally just a wire hung with two nails) above my desk for a couple years now, and a mini teacup filled with mini wooden clothespins to hang pretty clippings up with right below it...but it wasn't until just the other day when I was straightening up and had three bottles of nail polish in my hand to put away, that it occurred to me that I might just be able to jazz up my standard pins with a quick coat of polish. Sure enough, it was a total cinch to do and now I have pretty gilded pins hanging on my wire.

They also make great tag holders for topping gifts, or you could incorporate them into a table placesetting—try tying napkins with festive ribbons and then affixing place cards to the ribbons with your clips). Teeny-tiny 1" wooden clothespins can be found in craft stores (I got mine at Michael's) and online (I recommend Besotted Brand LLC). Don't limit yourself to using only gold polish, there are endless colors or nail polish out there, so choose your favorite hues and have fun!

Supplies Needed:

• Mini wooden clothespins - I used the 1" size
• Nail polish in gold or any other color you'd like — high gloss varieties work best
• Scrap cardstock paper

Tip: Click on the following tutorial step photos to see an enlarged view in a new window.

Step 1: Create a working/drying area for your clips with a piece of scrap cardstock. Fold one end of your cardstock to create a 3" flap.

Step 2: Keep paper folded and create a 1" fold on top of the initial 3" fold. Turn paper over and fold the 1" fold back the other way to deepen the crease.

Step 3: Open Paper and pinch the portion where you created the 1" fold so that it forms a raised peak.

Step 4: Repeat with the other end of your paper if you will be making more than just a handful of clips.

Step 5: Attach one clip to the fold of your paper.

Step 6: Paint clip using nail polish, making sure to coat all sides.

Step 7: Repeat with as many clips as you'd like to make. Leave clip(s) attached to paper until they are completely dry (I recommend letting them sit for at least an hour).

To use as a tag holder on a gift, wrap gift and tie with decorative twine. Attach clip onto the knotted portion of your gift and secure your gift tag inside it. Knot twine around the center of your clip and tie a bow to finish.

Prop notes: Twine from Knot & Bow | Mini Clothespins from Michael's | Kraft Favor Box from Michael's | hello friend card with decal from Shanna Murray | Art Print from Caitlin Shearer | Nail Polish pictured from Orly (Luxe), Revlon (Silver Dollar), and Piggy Polish (Sunrise Skies)

Want more 5 Minute DIY ideas? Find them here. See even more DIY tutorials in the Projects & Inspiration Gallery.